Home > News > Content

Practical Points On Changing The Circular Saw Blades

Sep 05, 2018

 DSC_1336.jpg   The TCT circular saw is a multi-purpose saw blade that is uniquely created and invented, and is more robust and ergonomic in industrial design. The saw blade exceeds your expectations and will bring dynamic changes and differences to all industrial design operations.

    Circular saw blades are one of the power tools used in the industry and have the ability to actually cut any material in any way and for any purpose. Saw blades are commonly used in a variety of industrial cutting operations that result in simple cutting procedures.

    With the introduction of superior technology and superior tooling, circular saw blades have become an advantageous cutting tool, and new circular saw blades can be easily replaced with new circular saw blades through simple and easy steps. It doesn't take a lot of man-hours, all you need is an adjustable wrench. You will find that the cutting machine is ready to use the new circular saw blade and you will enjoy excellent cutting time.

    However, if we consider a real-time procedure for replacing old and worn circular saw blades with new circular saw blades, these procedures need to be implemented step by step.

The first thing you need to do is loosen the tool by closing the tool and then removing the battery or unplugging the squid from the plug.

    Next, place the saw frame on a sturdy iron table and let the blades hang from the table. If there are clips on the table, you can use them to attach the saw to the workbench to replace the blade, or you can use your weight to hold the saw in place.

    Cover the blade with a protective blade guard and hold the shield with your thumb to secure the saw to the table. Now, gradually rotate the saw blade by hand to find the offset hole inserted into the drill bit to prevent the blade from moving further.

    You should attach the adjustable wrench to the blade bolt of the saw blade. The bolt secures the blade to the saw and the blade will remain fully seated. Eliminate bolts, drill bits and old blades. Gradually slide the new circular saw blade onto the blade hub and insert the drill directly into the offset hole. Rotate the blade counterclockwise and everything is done.